Universal roller guides for guiding workpieces with height of 102 mm

Universal roller guides for safely guiding workpieces on a table saw with a workpiece height of 102 mm.

Increase the safety and accuracy of cuts in your shop with a new Compass RG-2 Universal Roller Guide. This roller guide is designed to apply firm, even holding pressure to workpieces against the backstop to achieve accurate cuts, prevent chattering, and protect the operator's fingers.

Unlike other devices on the market, such as Featherboards, the Compass RG-2 uses the guide rollers to hold the workpiece in place. With these rollers positioned on one-way bearings, which force the rollers to rotate only in the feed direction, reducing the chance of kickback. This device also uses a unique independent suspension mechanism, where each roller is fitted with a preloaded spring that allows the rollers to move independently to maintain even vertical pressure. The holding force of this device is also easily and continuously adjustable from 6.8 kg to 10 kg by simply turning the adjustable knob, allowing the required holding force to be applied according to the cutting requirements.

Advantages:

• Independent suspension mechanism
• Infinite grip strength adjustment
• Unidirectional roller bearings
• Bridge type T-slot for seamless installation
• Made from aircraft grade anodized aluminum
• Polyurethane rubber rollers for more grippy friction

Suitable for:

• Use on Harvey table saws, band saws, forming machines, router tables
• Other machines with a standard T-slot (19.05 mm x 9.53 mm x 25.4 mm)

Technical characteristics:

• Thickness of the main part: 50.8 mm
• Minimum and maximum thickness of the part: 2 mm – 102 mm
• Roller displacement: 165 mm
• Roller diameter: 50.8 mm
• Compatible T-slot size: 19.05mm x 9.53mm x 25.4mm
• Holding Pressure: 6.8kg-10kg